Rewires
Complex Electrical Installations Ltd are specialists in rewire solutions for domestic and commercial premises, we have been rewiring homes for years.
However many households and businesses we visit fail to acknowledge the overall importance of rewiring solutions for the home and workplace and the difference that rewiring can really make to a property. This page is designed to guide you through the important aspects of rewiring and help better inform you on this issue.
Why Is Rewiring Important?
Rewiring is crucial. All homes and businesses have some form of electricity and power source. In order to ensure that this is safely maintained it is important that routine and long term maintenance is carried out in order to ensure that the electronics inside a property are safe. There are a multitude of different problems and issues that can occur as a direct result of lack of maintenance or due to care and attention within a property.
One of the greatest hazards which can be associated with poor quality wiring and maintenance within a property is the fire hazard. Electrical appliances and wiring which has become worn can be a major cause of fires in the home or workplace. Electrical fires can be very serious and could lead to property damage and potentially risk life.
Therefore where possible its important that you call upon the skills and expertise of expert electricians in the field, to ensure that your property is safe from these key risk factors and dangers present in a poorly maintained electrical environment.
Another key reason why rewiring is important is improving your electrical capacity.
It is a well known fact that property’s built in older time periods tend to have less electrical capacity. This means that your electrical appliances may not be as efficient as they could be if you had your property rewired.
In addition to this you may find you have a lack of electricity within the household or business. By arranging to have your property rewired you can ensure that your home is fitted out with the latest electrical wiring and equipment to allow for much improved capacity and safety overall.
By reading below you can also find out further detail on what is involved in rewiring.
Complex Electrical Installations Ltd are a NAPIT approved contractor
Are Your Electrics Safe? Book an EICR now!
The Process Of Rewiring
- Protection
Dust sheets are fitted to the clients belongings, and floor protection is used where required. - Marking Out
We carefully plan all the new locations for your electrical system and mark the fuseboxes, routes and chases. - Making Routes
The carpets and floorboards are lifted to allow the cables to be ran, and we access the attic and basement. - Cutting And Chasing
Heavy plant machinery is used to create channels within the walls and space for the new electrical boxes and accessories. - Tidy
A tidy is required to removal the majority of the dust and rubble and keep the site clear and free to work.
- Electrical Wiring
Our electricians get to work installing your new wiring for circuits such as your lights, smoke alarms and sockets. - Making Good
Our plasterers make good all the cuts and chases in the property, concealing the new wiring within the walls. - Fit Out
When the plaster is dry our electricians then proceed with the final terminations and connections of your electrical outlets. - Final Test
Testing is carried out to ensure the new circuits operate as they should before we send our your final certification. - Re-Instatement
Our re-instatment team will contact you to offer services such as plastering and decoration to put your home back to normal
Rewiring Your Home
Rewiring is one of the most difficult maintenance tasks a homeowner can face.
It is a major project with works carried out in every room. Your home’s electrical system is powered by cables usually buried in the walls.
It’s recommended that these cables are replaced every 25 years.
The cables provide the power to your socket outlets, your lights and all other electrical items in your home, such as your cooker and boiler.
Sub-standard and wrongly installed electrics can result in fires, and electric shocks.
Older cables can deteriorate, cables that in the past were thought to be safe, have since been proven to be unsafe and hazardous.
We rewire your home to eliminate any potential problems and ensure everything is modern, safe and certificated.
When we arrive at your property we spend time arranging and preparing the site for works to begin.
It is important you carry out the necessary preparations stated in our terms.
We then work to route your new cables from your consumer unit, all around the property.
Cables are concealed under floors, in the attic space and within the walls and fabric of the building.
The cables will eventually be terminated at every electrical outlet throughout the property, and organised into separate circuits such as lights, and sockets.
Routing these cables involves lifting carpets and floorboards and chasing into the walls.
Chasing Brick Walls Gets Messy!
If the property is old enough to need rewiring, it’s likely it will be internally constructed of brick or lath/plaster.
On brick we use wall chasers with dust extraction, and breaking power tools.
These tools allow us to work through the brick quickly and efficiently, however they can still create some dust.
On lath/plaster walls we cause minimal damage to the internal strapping. Any damage caused would be suitably bonded to make sure it’s still structurally sound.
Floorboards don’t always come up easily, we use appropriate tools to ensure the best cuts are made to minimise damage.
We understand that potentially you may wish to re-sand your floorboards.
When we remove the floorboard, we then route our cables either by boring holes in the joist or notching a small part from the timber and replacing with a metal safe plate.
What Next?
When the wiring is complete, the floorboards are then screwed down, or nailed if preferred.
When the cables are suitably routed, and the back boxes are mounted, we then install a protective capping over the cables.
While not required, it’s good practice and keeps things neat, allowing the plasterers to crack on without damaging our cables!
Our plasterers then get to work repairing and making good any damage we have made.
When the plaster sets, we finally screw up your fresh new sockets and switches.
Rewiring is a major task.
You should fully understand the work involved and the scale of the job.
Our engineers are more than happy to discuss every aspect of the job with you prior to our arrival.
All of our electricians also hold a NAPIT Certification to make sure any work is carried out safely and efficiently.

